Actions
Manage

Agent Actions & Approvals

Read-only by default. Physical actions need named supervisor approval and only ever run as a simulation.

Role: Operator (sandbox)Simulated execution only
ACT-101 · irrigation

Controlled 20-min irrigation run · Zone C

awaiting approval

Bring Zone C soil moisture back toward its 20% rule threshold before afternoon heat.

  1. proposed
  2. awaiting approval
  3. approved
  4. queued
  5. running
  6. verifying
  7. completed
Before
Zone C 14% · valve closed · pump off
Proposed change
Open VALVE-C, enable PUMP-01 at 18 L/min for 20 min, then close and stop.
Forecast outcome (simulated)
360 L · 0.50 kWh · ≈+2 pts at next reading
Origin incident
INC-001
Proposer
NDara Field Agent (simulated)
Targets
VALVE-C, PUMP-01
Required role
Supervisor
Approver
—
Start / window
Now (on approval)
Alternatives
Wait until 05:30 tomorrow · Inspect valve and probe first
Needs Supervisor role — switch role in the header (sandbox)
Action progress timeline

Execution events

  1. 08:34Submitted for supervisor approval
  2. 08:34Proposal drafted from INC-001 evidence
Append-only (local) · mode: simulation

Audit log

TimeActorEventObjectStatusDetails
08:34NDara Field Agent (simulated)action.proposedACT-101awaiting approval20-min controlled run, 360 L estimated.
07:52Rule engineincident.openedINC-001openSENSOR-C1 moisture 14% below 20% rule threshold.
02:20NDara Field Agent (simulated)incident.openedINC-002investigatingKAZE-02 output below wind-adjusted baseline.
15:40K. Akana (Supervisor)action.completedACT-090approved → completedGateway modem power cycled; uplinks verified.